木塑复合材料的注射成型研究(1)毕业论文

 2021-04-27 10:04

摘 要

木塑复合材料具有高强度、低价格等特点。本课题以回收聚乙烯和杨木粉为原料,采用了双螺杆挤出机制备了聚乙烯木塑复合材料,然后采用注射成型的方法制成标准样条。实验分别研究了单独加入增强剂以及同时加入增强剂和增韧剂对聚乙烯木塑复合材料性能的影响。实验结果表明如下:

(1)结果表明,增强剂的加入会使木塑复合材料试样的拉伸强度下降,使弯曲强度和冲击强度增加,对增强剂含量为20份和25份的木塑复合材料的接触角有降低作用,增加亲水性;对增强剂含量为30份的木塑复合材料的接触角有增大作用,减弱亲水性。

(2)结果表明,增强剂和增韧剂含量都为5份时,所得的试样外观和材料的力学性能(拉伸强度,弯曲强度,冲击强度)较好。随着增强剂和增韧剂用量的增加,复合材料的接触角逐渐减小,亲水性逐渐变好。

关键词:聚乙烯;增强剂;增韧剂;注射成型;木塑复合材料

Abstract

WPC has the characteristics of high strength, low prices. The problem with recycling polyethylene and poplar powder as raw material, using a twin-screw extruder of polyethylene prepared WPC, then made using standard injection molding method spline. Experimental study of the effect of reinforcing agent added separately polyethylene plastic composite material properties. And while adding impact enhancer and toughening of polyethylene wood-plastic composites. The results showed as follows:

  1. The results show that the tensile strength enhancer will join the WPC samples decreased, the bending strength and impact strength increase of enhancer content of 20 parts and 25 parts of WPC contact angle lowering effect, increasing the hydrophilic; the contact angle of the enhancer content of 30 parts of wood-plastic composite materials are increased role, weakening the hydrophilic.
  2. The results show that both the content of reinforcing agent, and 5 parts of toughening agent, the appearance and mechanical properties(tensile strength, flexural strength, impact strength)of the obtained sample material is better. With the increase of the amount of reinforcement and toughening agent, the contact angle of the composite material decreases, the hydrophilic gradually changed for the better.

Key words: Polythene;reinforcing;toughening;Injection molding

目录

摘 要 i

Abstract ii

目录 I

1. 绪论 1

1.1 木塑复合材料的简介 2

1.1.1 木塑复合材料的概念 2

1.1.2 木塑复合材料的现状 2

1.2 木塑复合材料的发展历史和前景 3

1.2.1 木塑复合材料的发展历史 3

1.2.2 木塑复合材料的应用 4

1.2.3 木塑复合材料的发展前景 5

1.3 提高木塑复合材料界面相容性的途径 5

1.3.1木纤维的预处理 5

1.3.2 对木质纤维的表面进行预处理 6

1.4 木塑复合材料的注射成型 6

1.4.1 注射成型原理 8

1.4.2 注射机组成 8

1.5 木塑复合材料注射成型研究现状 9

1.5.1 木塑复合材料注射成型国外研究现状 9

1.5.2 木塑复合材料注射成型国内研究现状 10

2. 聚乙烯基木塑复合材料的制备及性能测定 12

2.1 实验材料 12

2.1.1 材料和试剂 12

2.1.2 主要仪器 12

2.2 实验步骤 12

2.2.1 杨木粉的预处理 13

2.2.2 不同添加剂比例的聚乙烯木塑复合材料的制备 13

2.2.3 聚乙烯木塑复合材料的注射成型 13

2.3. 实验测试分析方法 14

2.3.1 拉伸性能测试 14

2.3.2 弯曲性能测试 15

2.3.3 冲击强度性能测试 16

2.3.4 接触角的测试 17

2.4 结果与讨论 18

2.4.1 单独加入增强剂对试样力学性能和接触角的影响 18

2.4.2 同时加入增强剂和增韧剂对试样力学性能和接触角的影响 21

3 结论与展望 24

3.1 实验结论 24

3.1.1 增强剂含量对试样性能的影响 24

3.1.2 增强剂和增韧剂含量相同时其含量对试样性能的影响 24

3.2 实验的不足与展望 24

致 谢 25

参考文献 26

  1. 绪论

WPC的生产工艺包括挤出成型、模压成型和注射成型等。其中注射成型是一个较新的研究领域。注射成型的优点是快速度的生产、高效率,易实现自动化生产,能制成形状复杂的制件。

本实验的主要的研究内容如下本实验主要研究的内容如下:(1)利用挤出成型原理,制备聚乙烯木塑复合材料原料;(2)利用塑料注射成型的基本原理,对聚乙烯木塑复合材料的注射成型工艺进行摸索,制备聚乙烯木塑复合材料试验样条;(3)利用万能试验机,冲击强度试验机和接触角测试仪,对注射成型的产品进行性能测试。

1.1 木塑复合材料的简介

1.1.1 木塑复合材料的概念

木塑复合材料(wood-plastics composites,简称WPC)是利用热熔塑胶,包括聚乙烯、聚丙烯、聚氯乙烯以及它们的共聚物等作为胶粘剂,用木质粉料如木材、植物秸秆、农植物壳类物粉料为填充料,经挤压法成型或压制法、注塑法成型所形成的复合材料。木塑复合材料的主要原料是农林废弃物和废旧塑料,开发WPC对于环境保护和废弃物的综合利用具有重要意义,因而受到人们广泛的重视[1-2]。木塑复合材料不仅具有原木特有的木质感,而且它具有较好的机械性能、尺寸稳定性好,耐水性、耐磨性、耐化学腐蚀性优良,不怕虫蛀,易于着色,维护要求低,使用寿命长,易于成型,可二次加工等众多优异性能。因而,木塑复合材料现已引起国际上的广泛重视,被誉为绿色环保新型材料,具有广阔的发展前景[3]

您需要先支付 80元 才能查看全部内容!立即支付

课题毕业论文、开题报告、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找,优先添加企业微信。